DC Pile Production Line Safety Test
Functional characteristics:
·There are single gun and dual gun test modes.
·Meet GB/T18487.1, IEC61851, SAE J1772.
·Test items can be combined freely, and test configurations can be saved and called directly.
·Test data can be saved to generate test reports for sale, and production data can be exported, traced and connected to the MES system.
·The pile number can be entered through the scanning gun, and the test data can be automatically correlated according to the pile number.
·There are single gun and dual gun test modes.
·Meet GB/T18487.1, IEC61851, SAE J1772.
·Test items can be combined freely, and test configurations can be saved and called directly.
·Test data can be saved to generate test reports for sale, and production data can be exported, traced and connected to the MES system.
·The pile number can be entered through the scanning gun, and the test data can be automatically correlated according to the pile number.
| Function | ALR-9000S-safety test system | |
| Insulation Resistance | Insulation test voltage | 500VDC-1000VDC continuously settable, default 500VDC |
| Test position | Optional: input-PE, output-PE, input-output, default: full test | |
| Test time | can be set, default 2S | |
| Criterion | 10-100MΩ continuous can be set, the default more than 10MΩ | |
| Dielectric Strength | Test Voltage Type | AC, default AC |
| Test Voltage | 1000-3000VAC, 1400-4200VDC continuously settable | |
| Test time | 5.60S can continuously set the default 5S | |
| Criterion | 1.10mA continuous can be set, default ≤ 10mA | |
| Grounding Test | The input side PE and the output side PE pass current 25A, read the tester resistance,<0.1Ω | |
